Ultimate protection for hard-driven, high performance vehicles. Dramatically reduces friction and wear for improved performance. Excels at both high- and low-temperature performance. Outperforms other conventional and synthetic greases.

Applications
AMSOIL Series 2000 Synthetic Lithium Complex Racing Grease meets the highest performance standards of the National Lubricating Grease Institute, GC for wheel bearing applications and LB for chassis applications.

Extreme-pressure, moly-fortified. Provides outstanding protection for four wheel drive steering knuckles, spring shackles, heavy equipment pivot joints and other components operating in high-load, low-speed conditions. Offers excellent water washout resistance.

PRODUCT DESCRIPTION
AMSOIL GH Series Heavy Duty EP grease is composed of synthetic base oils and lithium-complex thickeners that provides the film strength, shear resistance, and mechanical stability critical to high load protection. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points and good low temperature torque values and pumping capabilities. AMSOIL Heavy Duty EP Grease is compounded with oxidation and corrosion inhibitors, effective oil soluble EP additives and molybdenum disulfide (moly) solid EP additives for all around protection in severe conditions.

PRODUCT DESCRIPTION
AMSOIL Synthetic Multi-Purpose Grease grade #2 is recommended in manual or automatic lubricating systems.

NLGI #2 (GLC) is the preferred choice for medium to high ambient temperatures, sleeve type bushings, high shock loading environments, wet environments and wheel bearings and other automotive applications.

The correct consistency grade of AMSOIL Synthetic Multi-Purpose Grease is recommended in heavy and light duty applications found in manufacturing plants, automobiles, agricultural and construction equipment.

These include, but are not limited to, roller bearings, plain bearings, thrust bearings, gears, electric motors, presses, winches, bushings, wheel bearings, chassis lubrication, universal joints, ball joints, tie-rod ends, and steering knuckles. AMSOIL Synthetic Multi-Purpose Greases are suitable for use up to 350 degrees F. When operating at elevated temperatures, frequent regreasing may be required.

AMSOIL Synthetic Multi-Purpose Greases are compatible with many other types of greases. However, it is recommended that when changing greases, the equipment be cleaned of the old grease when possible or flushed with a liberal amount of Multi-Purpose Grease while the mechanism is in operation. Closely monitor the system for any inconsistencies. Grease compatibility questions should be referred to your AMSOIL representative or AMSOIL Inc.

PERFORMANCE FEATURES

• High dropping point of 500^°F+
• Resists thermal and oxidation degradation
• Excellent water-washout resistance
• Good low temperature pumpability and torque values
• Adhesive and shear stable to prevent squeeze out

Applications or Requirements

• GLC (#2) ASTM D-4950 (NLGI) Service GC/LB
• GLC (#2) Cincinnati Milicron P-64 Spec
• GLC (#2) Mack MG-C

PRODUCT DESCRIPTION
AMSOIL GLC multi-purpose, EP grease is qualified against the highest grease standards, NLGI GC (wheel bearing) and LB (chassis), and is designed for multiple use applications. This grease is composed of synthetic base oils and lithium complex thickeners that provide the film strength, shear resistance and mechanical stability required for good grease lubrication. This combination excels in high and low operating temperature ranges by providing excellent oxidation stability, high temperature dropping points, good low temperature torque values and good low temperature pumping capabilities. GLC Grease is compounded with an effective oil soluble extreme-pressure additive for heavy loads, plus oxidation and corrosion inhibitors that impart good oxidation stability and rust protection.

AMSOIL’s top performing lithium complex thickener system provides excellent adhesion properties and water resistance as identified by ASTM D-1264 water washout test. This resistance to water means a protective film of lubricant remains present to protect equipment against wear while the corrosion inhibitors prevent rust. AMSOIL GLC Grease adheres to metal in all types of environments and resists squeeze out during operation. These qualities ensure maximum lubricant protection during harsh operations.

AMSOIL GLC multi-purpose greases is recommended for many different applications. Its diversity simplifies lubricant inventories and prevents greasing errors while providing problem-free operation. AMSOIL GLC Grease reduces repair and maintenance costs.

PERFORMANCE FEATURES

• High dropping point of 550^°F
• Resists thermal and oxidation degradation (lasts longer than conventional grease)
• Excellent water-washout resistance
• Good low temperature pumpability and torque values
• Adhesive and shear stable to prevent squeeze out

AMSOIL Semi-Fluid 00 Synthetic EP Grease is a lithium complex semifluid grease (NLGI 00) formulated with high-viscosity ISO-460 synthetic base oils. Coupled with a sophisticated additive package, AMSOIL Semi-Fluid 00 Synthetic EP Grease coats and reacts to metal surfaces, providing an unparalleled protection system that reduces wear and prevents damage.

Formulated to Lubricate and Protect Agricultural and Commercial Equipment

PRODUCT DESCRIPTION
AMSOIL Semi-Fluid 00 Synthetic EP Grease (GSF) is formulated with high viscosity ISO-460 synthetic base oils and a sophisticated additive package, providing and unparalleled protection system that reduces wear and prevents damage. Its advanced extreme pressure additives provide superior protection and performance in shock loading applications which can rupture the oil film of conventional greases and lead to damaging metal to metal contact. AMSOIL Semi-Fluid Grease resists water and provides superior protection against corrosion and oxidation, which can eat away and destroy critical components and lead to equipment failure.

AMSOIL Synthetic GVC is a lithium complex thickened grease blended with premium ISO-320 synthetic base oils.

PRODUCT DESCRIPTION
AMSOIL Synthetic GVC is a lithium complex thickened grease blended with premium ISO-320 synthetic base oils. This grease is fully compounded with additives providing EP protection, oxidation resistance and rust and corrosion protection. AMSOIL GVC is shear stable, maintaining its viscosity and consistency in the presence of mechanical activity, and GVC stays in place by resisting water washout. During high-temperature operation, GVC's thickener system remains intact and the high viscosity base oils resist thermal breakdown and provide a thick film of lubricant for good boundary lubrication. AMSOIL GVC adheres to critical components in sever conditions and provides problem-free operation, resulting in increased uptime and reduced repair and maintenance costs.

Stays in place and protects over a broad temperature range without flaking in low temperatures or softening in high temperatures. Excellent for fifth wheel applications, with a convenient aerosol spray application that creates less mess. Designed to resist water washout. Can also be used in open gear applications.

PRODUCT DESCRIPTION
AMSOIL Synthetic Fifth Wheel and Open Gear Compound (GFW) is based on novel, proprietary technology resulting in a lubricant that does not use asphaltic materials, residual compounded oils or diluent solvents as part of the lubricant formulation.* Typical gear compounds are composed of asphaltic and residual oils cut with solvent to ease application and use. Synthetic GFW does not require solvents to assist the product in application and use, even in cold weather. GFW meets the AGMA specification 14R for open gear lubricants.

Multi-Purpose NLGI #2 GC-LB Extreme Pressure Fortified. Superior lubrication and protection in automotive and industrial applications with extensive exposure to water.

PRODUCT DESCRIPTION
AMSOIL Synthetic Water Resistant Grease (GWR) is an extreme-pressure, multipurpose grease formulated specially for wet-duty performance. Its water washout and sprayoff resistance are ideal for wheel bearings of vehicles and trailers frequently exposed to water, mud, snow or ice. It is also excellent for use in plants, such as paper mills, in which machinery undergoes frequent or prolonged exposure to water.

AMSOIL X-Treme Synthetic Food Grade Grease is an ultra-premium aluminum complex grease designed for high levels of protection in food service and pharmaceutical industry equipment. USDA H-1 rated for incidental contact with food.

PRODUCT DESCRIPTION
AMSOIL X-Treme Synthetic Food Grade Grease is an ultra-premium aluminum complex grease designed for food service and pharmaceutical industry equipment where there is a possibility of incidental contact.

Remains Stable at Temperature Extremes
This product provides exceptional performance over a wide temperature operating range of -35°F to 350°F (up to 400°F in intermittent use situations), making it suitable for both hot and cold applications.

Formulated for "All Weather" Performance in Farm and Commercial Equipment.

PRODUCT DESCRIPTION
AMSOIL Synthetic Tractor Hydraulic/Transmission Oil is an all-weather Universal Tractor Transmission Oil (UTTO) engineered to meet the tough demands of heavy-duty, hydraulic-powered farm and commercial equipment. Its unique formulation of synthetic base stocks and additives effectively reduces wear, resists heat, protects against rust and extends fluid and equipment service life. Synthetic Tractor Hydraulic/Transmission Oil is recommended for extended oil drains based on oil analysis.

Protects hard-working hydraulic systems from the stress of high-pressure, high-load and heavy-duty operations. Remains fluid in cold temperatures for immediate cold-weather flow. Special anti-wear additives and rust inhibitors provide optimum protection to expensive equipment.

PRODUCT DESCRIPTION
AMSOIL Synthetic AW Series Anti-wear Hydraulic Oils are shear-stable, long-life lubricants based on high-quality synthetic oil technology. These oils are formulated with a premium additive system that inhibits oxidation to prevent acid formation and viscosity increase and inhibit rust and foam (providing smooth hydraulic operation). AW Oils contain a very effective zinc-based anti-wear/antioxidant additive which controls wear in high-speed, high-pressure vane and gear pumps while meeting the lubrication requirements of axial piston pumps with bronze-on-steel metallurgy. AW Oils meet the requirements for Maximum Efficiency Hydraulic Fluid (mehf) and can lower costs and/or increase productivity in mobile equipment by 6 to 15%. Improved pump efficiency can increase hydraulic power, reduce fuel consumption and improve productivity. They are designed for long life and typically reduce maintenance costs by extending drain intervals and reducing labor costs, repairs and downtime.

• Denison HF-0, HF-1, HF-2
• Vickers M-2950-S, I-286-S
• Cincinnati Milacron P-68, P-70

PRODUCT DESCRIPTION
AMSOIL TBI hydraulic oil is a premium lubricant designed to biodegrade to its natural state when subjected to sunlight, water and microbial activity. Because it is formulated with ashless additives that do not contain heavy metals, TBI has a very low toxicity level.

AMSOIL TBI incorporates very high-quality synthetic base oils that provide thermal stability, even though they are biodegradable. TBI also contains antiwear additives that have been thoroughly tested and qualified against stringent hydraulic oil standards including Denison HF-0, HF-1 and HF-2, Vickers M-2950-S and I-286-S and Cincinnati Milacron P-68 and P-70. TBI provides optimum protection for hydraulics, preventing pump wear and rusting of critical components. It also contains antioxidants that increase oil life and foam inhibitors that quickly release air from the oil.

AMSOIL Semi-Synthetic WLJ is a high-quality, heavy duty lubricant composed of synthetic base oils, large molecule petroleum base oils and additives specifically designed for EP applications found in gear, chain and machine tool applications. This combination of base oils and EP additives provides the excellent lubricity and film strength needed to prevent scoring and wear during equipment operations. By incorporating synthetic base oils, AMSOIL WLJ reduces friction for good overall performance.

Product Description
AMSOIL Semi-Synthetic WLJ is a high-quality, heavy duty lubricant composed of synthetic base oils, large molecule petroleum base oils and additives specifically designed for EP applications found in gear, chain and machine tool applications. This combination of base oils and EP additives provides the excellent lubricity and film strength needed to prevent scoring and wear during equipment operations. By incorporating synthetic base oils, AMSOIL WLJ reduces friction for good overall performance.

Performance Features

• Tackified for excellent adhesion and water resistance.
• Rust and corrosion inhibited.
• EP additives prevent stick/slip and slideway scoring.
• Semi-synthetic adds lubricity and reduces friction.
• Recommended for slideways, chains and EP gear applications.

PC Series Synthetic Compressor Oils

The correct manufacturer-recommended viscosity grade of AMSOIL PC Series compressor oil is recommended for use in rotary screw, rotary vane, reciprocating and other compressor applications. Compatible with PAO-, ester- and petroleum-based compressor oils. They are not compatible with glycol- or silicone-based compressor oils. Consult AMSOIL for further information.

PRODUCT DESCRIPTION
AMSOIL PC Series Synthetic Compressor Oils are long-life, premium compressor lubricants based on novel, proprietary technology. They incorporate the highest quality, thermally-stable PAO synthetics fortified with premium non-detergent, ashless additives for maximum protection at high temperatures and pressures. They last up to eight times longer than petroleum oils, effectively reducing maintenance and waste oil disposal costs.

The correct manufacturer-recommended viscosity grade of AMSOIL PC Series compressor oil is recommended for use in rotary screw, rotary vane, reciprocating and other compressor applications. Compatible with PAO-, ester- and petroleum-based compressor oils. They are not compatible with glycol- or silicone-based compressor oils. Consult AMSOIL for further information.

Compressor Oil Cross Reference Guide (68k PDF)

PRODUCT DESCRIPTION
AMSOIL PC Series Synthetic Compressor Oils are long-life, premium compressor lubricants based on novel, proprietary technology. They incorporate the highest quality, thermally-stable PAO synthetics fortified with premium non-detergent, ashless additives for maximum protection at high temperatures and pressures. They last up to eight times longer than petroleum oils, effectively reducing maintenance and waste oil disposal costs.

The correct manufacturer-recommended viscosity grade of AMSOIL PC Series compressor oil is recommended for use in rotary screw, rotary vane, reciprocating and other compressor applications. Compatible with PAO-, ester- and petroleum-based compressor oils. They are not compatible with glycol- or silicone-based compressor oils. Consult AMSOIL for further information.

Compressor Oil Cross Reference Guide (68k PDF)

PRODUCT DESCRIPTION
AMSOIL PC Series Synthetic Compressor Oils are long life, premium compressor lubricants based on novel, proprietary technology. They incorporate the highest quality, thermally-stable PAO synthetics fortified with premium non-detergent, ashless additives for maximum protection at high temperatures and pressures. They last up to eight times longer than petroleum oils, effectively reducing maintenance and waste oil disposal costs.

The correct manufacturer-recommended viscosity grade of AMSOIL PC Series compressor oil is recommended for use in rotary screw, rotary vane, reciprocating and other compressor applications. Compatible with PAO-, ester- and petroleum-based compressor oils. They are not compatible with glycol- or silicone-based compressor oils. Consult AMSOIL for further information.

Compressor Oil Cross Reference Guide (68k PDF)

PRODUCT DESCRIPTION
AMSOIL PC Series Synthetic Compressor Oils are long life, premium compressor lubricants based on novel, proprietary technology. They incorporate the highest quality, thermally-stable PAO synthetics fortified with premium non-detergent, ashless additives for maximum protection at high temperatures and pressures. They last up to eight times longer than petroleum oils, effectively reducing maintenance and waste oil disposal costs.

The correct manufacturer-recommended viscosity grade of AMSOIL PC Series compressor oil is recommended for use in rotary screw, rotary vane, reciprocating and other compressor applications. Compatible with PAO-, ester- and petroleum-based compressor oils. They are not compatible with glycol- or silicone-based compressor oils. Consult AMSOIL for further information.

Compressor Oil Cross Reference Guide (68k PDF)

PRODUCT DESCRIPTION
AMSOIL PC Series Synthetic Compressor Oils are long life, premium compressor lubricants based on novel, proprietary technology. They incorporate the highest quality, thermally-stable PAO synthetics fortified with premium non-detergent, ashless additives for maximum protection at high temperatures and pressures. They last up to eight times longer than petroleum oils, effectively reducing maintenance and waste oil disposal costs.

Ideal for chainsaws and bicycle chains. Its semi-synthetic base stocks reduce drag effectively, which optimizes efficiency and extends chain life. Tacky formula clings to metal surfaces better than other oils, delivering unparalleled lubrication and protection.